Reliable technology and industry standard interfaces for rough environments: Our tried and tested thermal mass flow meters and controllers for gases of the red-y smart series now available as IP67 / NEMA 6 version.
Rough Environment Mass Flow Meters & Mass Flow Controllers for Gases
{loadposition red-y}
Accurate Measurement
The massflow devices offer high accuracy and a wide dynamic range with the 2 different instrument versions “Standard” and “Hi-Performance”:
Accuracy up to ± 0.3% of full scale + ±0.5% of reading
Turndown ratio 1 : 100 (extended turndown ratio on request)
Analog & Digital
The red-y industrial mass flow meters and controllers make use of the latest MEMS technology and have a digital (Modbus RTU) and analog interface as standard.
IP67 / NEMA 6 Protection
The instruments offer IP67 / NEMA 6 protection against solid particles and water
ATEX Certification
red-y industrial devices come along with ATEX certification (Category 3 / Zone 2 & 22)
Multiple Connections
The red-y industrial series is available with different connection types: Cable gland with compression fitting or optional M12 plug on top
Setup Tool get red-y
Efficient device setup with the free get red-y software:
- Service tool for remote maintenance
- Switch gas type
- Switch measurement units
- Adjust control parameters
Options
Multigas (option)
One meter or controller can be used for up to 10 different gases or gas mixtures
Profibus
The instruments are available with Profibus interface: DP-V0 & DP-V1 protocols
3-Year Warranty
High-quality components ensure long and trouble-free operation (does not apply to calibration, options and accessories)
Types & Options red-y industrial series
red-y industrial meter GIM
Flow up to 450 ln/min (480 SLPM)
Body size ¼” and ½”
Stainless steel 316L version
red-y industrial controller GIC
Flow up to 450 ln/min (480 SLPM)
Body size ¼” and ½”
Stainless steel 316L version
red-y industrial controller GIE
Flow up to 450 ln/min (480 SLPM)
Body size ¼” and ½”
Stainless steel 316L version
Customized OEM Solutions:
For a wide range of applications the thermal mass flow meters and mass flow controllers offer you a significant optimization and simplification of your processes.
Technical Specifications red-y industrial series
MEASURING RANGES
Body size ½” from 0 … 60 ln/min to 0 … 450 ln/min(from 0 … 65 SLPM to 0 … 480 SLPM)
INSTRUMENT VERSIONS
The economic solution
Turndown ratio: 1 : 50
With highest accuracy and turndown ratio
(available for GIM < 200 ln/min (200 SLPM) /
GIC < 150 ln/min (150 SLPM) (air))
Turndown ratio: 1 : 100
*An additional error of ±0.25% may apply for analogue signals
PERFORMANCE DATA
*O2 & N2 are calibrated with air
Meter: 50 ms; Controller: 150 ms
Meter: max. 100 mA; Controller: max. 250 mA (except GIE)
< 1 sec. for full accuracy
MATERIALS
Stainless steel 316L (see operating instructions for wetted parts)
EPDM (FDA), optional FKM
INTEGRATION & INSTALLATION
G½” (BSPP* female) up to 450 ln/min (480 SLPM)
*British Standard Pipe Parallel
(both connection IP67 protected)
Please contact the manufacturer for further information.
SAFETY
16 bara (240 psia)
< 1 x 10-6 mbar l/s He
II 3D Ex tc IIIC T100°C Dc (Category 3 / Zone 22)
